User Manual

Online Chapter 5. Online and Synchronization
MTX-MRX Editor User Guide
140
Procedure
1. In the toolbar, click the [Online] button.
The “Synchronization” dialog box will appear, allowing you to choose the direction
of synchronization.
2. Choose either [To Device] or [From Device] to specify the direction in
which synchronization will occur.
Click the [OK] button to switch to a display that lets you choose the system that will
be synchronized. If you click the [Cancel] button, the operation will be cancelled.
If you chose [To Device]
The settings of MTX-MRX Editor will be transmitted to the devices, overwriting
their settings.
If you chose [From Device]
The settings of the devices will be loaded into MTX-MRX Editor.
If the PIN code differs between MTX-MRX Editor’s project file and the devices, a PIN
code entry dialog box will appear. Enter the correct PIN code to go online.
3. Select the MTX/MRX system that you want to place online.
• [Detail] button
Displays the progress, synchronization status, and error messages for the devices in
each MTX/MRX system.
4. Click the [Online] button.
Synchronization will begin. If you click the [Cancel] button, the operation will be
cancelled.
If an MRX is assigned to the MTX/MRX system that is being brought online, but
compile has not yet been executed, compile is executed automatically. If compile fails
or if the memory usage exceeds 100%, the “Compile” dialog box appears, and
synchronization is stopped.
NOTE
NOTE