User Manual

“Preset” dialog box Chapter 6. Presets
MTX-MRX Editor User Guide
147
•Scheduler ( )
If this check box is selected, the scheduler function will be enabled when the preset
is recalled.
If the scheduler is disabled, the [SCHEDULER] indicator of the MTX/MRX unit itself will
flash rapidly when the event time occurs.
• [MTX3]/[MTX5-D]
If even one item is specified in the Recall Filter setting screen as excluded from
recall, this area will indicate “ .”
• [EXT. I/O]
If even one item is specified in the Recall Filter setting screen as excluded from
recall, this area will indicate “ .”
R series (AD/DA) and Tio1608-D are also included in [EXT. I/O].
• [MRX7-D] (only if there is an MRX assigned in the MTX/MRX system)
When you execute Store, the screen indicates “ALL Parameters,” and the current
parameters of all components are stored.
The MRX7-D has functions that let you recall only specified parameters (snapshots,
snapshot groups).
For details about these functions, refer to “MRX Designer User Guide.”
• [DCP]/[Wireless DCP]/[MCP1]/[GPI/SD PLAY/Ext. EVENT]
DCP, Wireless DCP, and MCP1 show the library items that will be recalled
simultaneously with the preset. For GPI/SD PLAY/Ext. EVENT, this always shows
“details...” You can change this setting in the “Settings” dialog box that appears when
you select a stored preset and click this area. However if the preset is protected, the
“Settings” dialog box will appear but you won’t be able to make changes.
If no DCP, Wireless DCP, or MCP1 library item is selected, this will indicate “No
Assign.” If a “No Assign” preset is recalled, DCP, Wireless DCP, and MCP1 units will
be in a state in which parameters have not been assigned. If you want the parameters
prior to recall to be maintained, remove them as recall targets in the Recall Filter
setting screen.
SD Play will maintain the settings from before the recall occurred.
If library data differs between devices, this is indicated by red characters. Store the
corresponding library item once again in the “Digital Control Panel” dialog box, the
“Wireless DCP” dialog box, or the “MCP1” dialog box.
Simply editing the [DCP]/[Wireless DCP]/[MCP1]/[GPI/SD PLAY/Ext. EVENT] settings
in the “Settings” dialog box will not apply your changes to the current parameters. In
order to apply the settings, you must recall that preset in the appropriate dialog box.
● [Copy] button
This button copies the selected preset.
The Copy command is not available while online.
● [Paste] button
This button pastes the copied preset to the preset that’s currently selected in the list.
The Paste command is not available while online.
● [Clear] button
This button clears the contents of the preset that’s currently selected in the list.
The Clear command is not available while online.
NOTE
NOTE