User Manual

“Settings” dialog box Chapter 6. Presets
MTX-MRX Editor User Guide
151
[GPI OUT]
Here you can specify the GPI OUT settings that will be output when the preset is
recalled. You can use GPI OUT output to control a device that’s connected to this unit’s
[GPI OUT] connectors.
• MTX/MRX select buttons
Select the button of the MTX/MRX unit whose settings you want to change. (Each
button shows the UNIT ID and device name.)
This displays the “GPI Out” dialog box.
• [GPI OUT] pin number and status
This shows the pin numbers of the [GPI OUT] connector, and the status that is
specified in the “GPI Out” dialog box.
[SD Song Select & Play]
Here you can specify a file that will be played when the preset is recalled. Each MTX/
MRX unit can play one file or play all files in the same folder in ascending alphabetical
order. If four MTX/MRX units are connected via YDIF, up to four files can be played
simultaneously.
If you want multiple songs to play, open the “SD Play” dialog box, click [Folder/File],
choose [Play all songs in a folder], and specify the folder that contains the songs. If you
frequently need to change the songs that will be played, create an identically-named
folder on another SD memory card, and save each set of songs on its own SD memory
card. This way, you can play back the other songs simply by exchanging SD memory
cards, without having to change settings in MTX-MRX Editor.
• MTX/MRX select buttons
Select the button of the MTX/MRX unit whose settings you want to change. (Each
button shows the UNIT ID and device name.)
The “SD Play” dialog box will appear.
•SONG
This shows the file name or folder name you specified in the “SD Play” dialog box.
MTX/MRX select buttons [GPI OUT] pin number and status
MTX/MRX select buttons