User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Auto-Assign IP Address” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
173
“Auto-Assign IP Address” dialog box
Information such as the IP address assigned to devices placed in MTX-MRX Editor using
the “Match Device by IP Address” dialog box is applied to the “IP Address” dialog box in
a single operation.
For details, refer to “Settings for controlling devices across subnets” in the appendix.
1 [Match Device by IP Address] button
Click this to open the “Match Device by IP Address” dialog box.
2 Device list
This shows information for the IP settings that are specified for the devices placed in
MTX-MRX Editor using the “Match Device by IP Address” dialog box.
3 DNS Server
Specifies the DNS server.
4 [Assign IP Address] button
Applies the information shown in the device list and the DNS Server settings to the
“IP Address” dialog box. Even if the [DHCP] option button is selected in the “IP
Address” dialog box, the [Use the following IP Address] option button is switched to
the selected state.
5 [Cancel] button
Closes the dialog box.
12
4
53