User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Clock” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
183
❑ “Clock” dialog box
The date and time of the computer are transmitted to each device connected to the MTX/MRX
system every time it goes online, automatically updating the internal clock of each device. If you
transmit the computer’s date and time information from this dialog box, the date and time will be
updated on an MTX/MRX unit that is connected to the same network, regardless of online/offline
status. The internal clock in devices other than the MTX/MRX will be updated by the MTX/MRX.
● Unit ID
Indicates the UNIT ID.
● Type
Indicates the type of device.
● Device Name
Indicates the device name.
● Current Time
Indicates the time information of the device.
● Internet Time Server
This is shown as On if the device is set to obtain time information from a time server;
it is shown as Off if the device is set to not use a time server.
● Host Name
This shows the time server’s host name or IP address if the device is set to obtain time
information from a time server.
● Time Zone
Indicates the time zone of the device.