User Manual

“Clock” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
184
● [Synchronize with a system clock in this computer] option button
If you select this option, the date and time of the computer’s system clock will be sent
out each time the system comes online, and the internal clock on the MTX/MRX will
be automatically updated.
•[Time]
Shows the date and time of the computer system clock, ignoring the daylight saving
time setting.
If this indication matches the date and time of the internal clock on the MTX/MRX,
the time information on the MTX/MRX will synchronize with that of the computer.
• [Daylight Saving Time(DST)]
Shows the daylight saving time used on the computer. If daylight saving time has not
been programmed, this field will display the message “Daylight Saving Time has not
been executed.”
● [Synchronize with an Internet time server]
If you select this and click the [Update Now] button, the internal clock of the MTX/
MRX is updated using the time information from the specified time server. After this
setting is made, the internal clock will synchronize with the time server every 24 hours.
If any required field is not completed, time information may not be obtained. Be sure
to enter an appropriate value in all non-grayed fields.
Notice
If you plan to specify an external time server, configure an Internet connection, and in the
IP Address dialog box, specify the [DNS server address] and [Default gateway] as
appropriate for the connection environment.
If you specify an external time server, make sure that the server is reliable. If you specify an
unreliable server, you may be exposed to certains risks, such as an infection by a computer
virus.
•[Host name]
If you select this option, enter the host name of the time server.
• [IP Address]
If you select this option, enter the IP address of the time server.
•[Time zone]
Set the local time difference from Greenwich Mean Time. The default setting is the
computer’s time zone.
• [Update Now] button
When you click this, the device’s internal clock is updated according to the settings.
● [Close] button
Closes the dialog box.