User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Daylight Saving Time” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
186
● Start Day
Indicates the date on which daylight saving time starts for the device.
● End Day
Indicates the date on which daylight saving time ends for the device.
● [Enable Daylight Saving Time] check box
Daylight saving time will be enabled if this check box is selected.
If the “Automatically adjust daylight saving time” check box is selected in the computer’s
“Date and Time” settings, you must also select the [Enable Daylight Saving Time] check box
in the “Daylight Saving Time” dialog box.
•Offset
Specifies the amount of time by which daylight saving time is earlier than standard
time.
• Start time
Specifies the time when daylight saving time begins.
For example if you set Offset as 01:00 and Start time as 12:00, the clock will be set to
13:00 when the time reaches 12:00 of the day on which daylight saving time begins.
•End time
Specifies the time when daylight saving time ends. If this is the same as the start
time, select [Same as Start time].
For example if you set Offset as 01:00 and End time as 12:00, the clock will be set to
11:00 when daylight saving time reaches 12:00 on the last day of daylight saving
time. If the [Same as Start time] check box is selected, daylight saving time will
automatically be cancelled and revert to standard time on the last day of daylight
saving time at the time specified by the Start time.
● Day of the week
If this is on, the term of daylight saving time will be specified as a day of the week. Use
Start and End to specify which day of which week will be the start and end of daylight
saving time. For example to specify the first Sunday in April, choose “First,” “Sunday,”
a nd “Ap r i l ”; to s p e ci f y t h e l as t Su nd ay in O c t ob e r, c ho o s e “ L a st , ” “S un day, ” a nd “ Oc t ob e r. ”
● Day
If this is on, the term of daylight saving time will be specified as a day of a month. Use
Start and End to specify the dates that will be the start and end of daylight saving time.
● [Update Now] button
When you click this, the device’s internal clock is updated according to the settings.
● [Close] button
Closes the dialog box.
NOTE