User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“PIN Setup” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
213
❑ “PIN Setup” dialog box
Here you can specify PIN codes for all MCP1 units within the MTX/MRX system.
A PIN code is specified if the system goes online with the MCP1 even once. If this has not been
specified, use 1111 to unlock.
● [MCP1 Admin PIN:] text box
This is the PIN code for opening the MCP1’s Settings page.
It can also be used as the “Power User PIN” or the “Panel Unlock PIN.”
● [Power User PIN:] text box
This is the PIN code for opening pages for which the [Power User Page [PIN required]]
check box is selected in a [Page 1]–[Page 6] tab of the “MCP1” dialog box.
● [Panel Unlock PIN:] text box
This is the PIN code for defeating panel lock if the [Enter PIN to unlock MCP1] check
box is selected in the [Dimmer & Lock] tab of the “MCP1” dialog box.