User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“PGM1 Label Creator” application Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
221
❑ “PGM1 Label Creator” application
Here you can create a printable label image for the PGM1 or PGX1.
To print the label, connect a printer to the computer.
● Pattern select buttons
Select the label pattern. PGM1 Label Creator can store up to three patterns on one
computer.
● [Export] button
Saves the settings to a file. Click this to open the “Save File” dialog box. The file
extension is *.plc.
● [Import] button
Loads settings from a *.plc file. Click this to open the “Load File” dialog box.
● [Cell]
Here you can edit the label.
To edit the text string, select a cell and double-click or press the <F2> key. To confirm,
press the <Enter> key or use the mouse to select another cell.
To insert an image, select the cell, then press the [Import] button in the “Background
Settings” area, and select an image file.