User Manual

Workflow for paging settings Appendix
MTX-MRX Editor User Guide
264
4. In the input channel port selection screen of the “MAIN” screen, assign
the input from the PGM1 to an input channel.
Notice
Input channels to which audio signals from a PGM1 are assigned should not be mixed
in the “MATRIX” screen. If these signals are mixed, the input from the PGM1 units will
be output to the zone even if PTT is off.
5. In the “PAGING” screen of the “ZONE” screen, assign the input from
the 1st Priority Mic specified in step 2 to 1st MIC.
In this example, CH1 is assigned to 1st Mic, CH2 to Mic2, CH3 to Mic3, CH4 to
Mic4, and STIN3L to SD.
6. As necessary, specify zone groups (collections of zones) in the right side
of the “PAGING” screen of the “ZONE” screen.
By assigning a Zone Group to a single zone/message select button of the PGM1, you
can lower the Program volume for multiple zones and broadcast using the PGM1.