User Manual

Moving between screens Chapter 1. An overview of MTX-MRX Editor
MTX-MRX Editor User Guide
27
Moving between screens
(*1)The “Device Configuration Wizard” dialog box can be opened only from the Project screen.
(*2)Not shown if the MRX is not selected in the “Device Configuration Wizard” dialog box. For
details about this screen, refer to “MRX Designer User Guide.”
(*3)Not shown if the MY4-AEC is not selected for the MTX5-D in the “Device Configuration
Wizard” dialog box.
Project screen
System screen
(“MAIN”
screen or
“MRX
Designer”
window) (*2)
SYSTEM tab [Project] tab
Toolbar or menu
Dialog boxes (*1)
[EXT. I/O] button
“EXT. I/O” screen
[MATRIX] button
[INPUT] button
[ROUTER] button [EFFECT] button
[DCA] button
“MATRIX” screen
“INPUT” screens “ZONE” screen
“ROUTER” screen “EFFECT” screen
“DCA” screen
Toolbar or menu
“EXo8” screen
“XMV” screen
[EXi8] button
[EXo8] button
[MY4-AEC]
button (*3)
“MY4-AEC” screen“OUTPUT” screens
[ZONE] button [OUTPUT] button
“EXi8” screen
[XMV] button
“I/O” screen
[I/O] button
[R/Tio] button
“R/Tio” screen