User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Tool buttons Chapter 2. Menu bar and tool buttons
MTX-MRX Editor User Guide
33
Synchro-
nization
Online
indicator
This will light if the devices and the computer
are online. The color of the indicator will change
according to the status. The indicator is shown
for each MTX/MRX system.
Blue ......when all devices assigned in the MTX/
MRX system are online.
Yellow ...when at least one of the devices
assigned in the MTX/MRX system is
offline
Unlit ......when all devices are offline.
–
[Online]
When you click this, the “Synchronization”
dialog box will appear, allowing you to choose
the direction of synchronization. If you click this
when online, devices that are offline will be re-
detected, and synchronization will begin.
Nothing will happen for devices that are already
online.
If an MTX/MRX that has been assigned in
the “Device Configuration Wizard” dialog
box is not actually connected to the
network, the [Online] button will not be
available.
“Synchronization” dialog
box
[Offline]
When you click this, a dialog box will appear,
allowing you to choose which MTX/MRX system
will be taken offline.
If an MTX/MRX that has been assigned in
the “Device Configuration Wizard” dialog
box is not actually connected to the
network, the [Offline] button will not be
available.
[Connection]
Switches the status of the connection between
MTX-MRX Editor and the network. Even in the
offline state, if this status is connected, MTX-
MRX Editor will send data to the network, for
example to search for devices. Set this to the
unconnected status if you don’t want
unnecessary data to be transmitted, for
example if you’re connected to an office LAN.
Connected.
Unconnected.
Related
tools
Buttons etc. Summary Dialog box that appears
NOTE
NOTE