User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
YDIF-connected devices Chapter 3. Project screen
MTX-MRX Editor User Guide
48
The currently-selected device is enclosed by a blue border.
(*) The red state will be cleared when you click the device icon or close the automatically-displayed popup.
Identify button
When you click this, the indicator of the corresponding device will flash for approximately
five seconds, allowing you to identify the device.
Indication
Online
indicator
Device icon Status
Unlit Dimmed
Does not exist on the network, or is not
connected to the computer (MTX-MRX
Editor).
Lit blue Indication
Exists on the network, and is synchronized
with MTX-MRX Editor (online status).
Lit green
“Offline” indicated
on the icon
Exists on the network, but is not
synchronized with MTX-MRX Editor (offline
status).
Lit blueRed
(*)
Synchronized with MTX-MRX Editor (online
status), and an alert has occurred.
Lit green Red
(*)
Not synchronized with MTX-MRX Editor
(offline status), and an alert has occurred.