User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“PAGING” screen (MTX5-D only) Chapter 4. System screen
MTX-MRX Editor User Guide
92
“PAGING” screen (MTX5-D only)
In this screen you can make settings for the PGM1 paging station microphone.
Paging refers to the function of broadcasting an announcement.
For the workflow of making settings, refer to “Workf l ow for pag ing settings” in the
appendix, or the “MTX Setup Manual.”
The SD messages referred to here are standard-format announcements saved on the SD
card of the MTX.
1 PAGING [ON] button
Turns the paging function on/off.
2 [Settings] button
When you click this, the “PGM1/PGX1” dialog boxwill appear.
3 PAGING SOURCE settings area
•Indicator
This is lit if there is a currently-broadcasting PGM1 or SD.
• Channel list box
Selects the paging source. Select the input channel to which a PGM1 or SD is
connected. Specify 1st Mic for the input channel of the PGM1 that is specified as 1st
Priority.
4 ZONE area
•Indicator
This is lit if there is a zone that is currently broadcasting using a PGM1 or SD
message.
1 2
3 645