User Manual

Wireless DCP Owner’s Manual

1. System Requirements

• Smart devices supported:

iPhone (iPhone3GS or later), iPod touch (3rd generation or later), iPad

Android OS 4.2 or later

Please refer to the Yamaha Pro Audio website shown below for the latest tested Android devices

and OS versions.

http://www.yamahaproaudio.com

• Yamaha Matrix Processor MTX-series

• Wi-Fi access point (preferably with 802.11n, 5-GHz capability)

• Cat 5e cable (for connecting MTX processor and Wi-Fi access point)

2. Getting Started

Set up your Wi-Fi access point as described in the manual that came with it. While no special settings

are needed, we recommend using WPA security or the like in order to prevent unwanted devices from

joining the network. Less experienced Wi-Fi users may benefit from the following suggestions.

1. Assign a name to your wireless network.

2. Activate a security mode (such as WPA2) and set a password.

3. Select a wireless mode such as 802.11n or 802.11g.

4. If available, enable Auto Channel Selection so that the wireless channel with the lowest level

of interference will be automatically selected.

We recommend using 802.11n networks as they support faster communication between smart devices

and Wi-Fi access points. We also recommend using Wi-Fi access points with multiple external anten-

nae as this makes it easier to connect to the network. For increased security, meanwhile, we recom-

mend using a stealth mode or MAC address filtering.