User Manual

List of settings in “Settings” dialog boxes
MRX Designer User Guide
132
List of settings in “Settings” dialog boxes
Here we explain functions, displays, and parameters that are unique to the MRX.
For details on items that are shared in common with the MTX series, refer to “MTX-MRX Editor User
Guide.”
❑ Digital Control Panel / Wireless DCP / MCP1
Settings for the DCP and Wireless DCP are explained here.
If [FUNCTION] is [MRX Parameter]
Parameters can be registered in the following ways.
When a parameter is registered, its UNIT ID, device name, component name, and
parameter name are shown if it is an individual parameter. In the case of a link master
parameter in a parameter link group, the parameter link group name and the parameter
name are shown.
In the case of a Wireless DCP, only ON/OFF-type parameters can be registered to a switch.
■ If the parameter registered to a switch is an ON/OFF-type
parameter
The switch controls the on/off setting of the parameter.
Registration source Registration method
Component editor / Link
Master editor / Parameter
setting window
While holding down <Ctrl>, drag and drop a parameter onto the
[PARAMETER] field.
“Parameters” area
*1
*1. You can also use <Shift> or <Ctrl> to simultaneously register multiple parameters in a list.
Drag and drop a parameter onto the [PARAMETER] field.
“Parameter Link Group”
area
While holding down <Ctrl>, drag and drop a parameter link group
onto the [PARAMETER] field.