User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
MIDI
Reference Manual
150
3. Press the MIDI SETUP tab to access the MIDI SETUP page.
In the MIDI SETUP page you can select the type of MIDI messages that will be transmitted and
received, and choose the port that will be used. This page includes the following items.
1 PORT/CH field
Enables you to select the port and MIDI channel that will be used to transmit and receive MIDI
messages.
• Tx PORT/Tx CH.......Press these buttons to open popup windows in which you can
respectively select a port and MIDI channel to transmit MIDI messages.
• Rx PORT/Rx CH.......Press these button to open popup windows in which you can respectively
select a port and MIDI channel to receive MIDI messages.
2 PROGRAM CHANGE field
Enables you to switch MIDI Program Change message transmission and reception on or off.
• Tx.................................Switches Program Change transmission on or off.
• Rx.................................Switches Program Change reception on or off.
• ECHO..........................Switches on or off echo output of Program Change messages (If this
function is on, Program Change messages received from an external
device will be retransmitted without modification.).
3 PROGRAM CHANGE MODE field
Enables you to select the Program Change transmit/receive mode.
• SINGLE.......................If this button is on, Program Changes will be transmitted and received
on a single MIDI channel (Single mode).
• MULTI ........................If this button is on, Program Changes will be transmitted and received
on multiple MIDI channels (Multi mode).
• OMNI ......................... If this button is on, Program Changes on all MIDI channels will be
transmitted and received in Single mode. Multi mode transmission/
reception and Single mode transmission are disabled.
• BANK ......................... If this button is on, Bank Select messages can be transmitted and
received in Single mode. (Bank Select messages switch the group of
Program Change messages to be used.)
4 CONTROL CHANGE field
Enables you to switch MIDI Control Change message transmission and reception on or off.
• Tx ................................ Switches Control Change transmission on or off.
• Rx ................................ Switches Control Change reception on or off.
• ECHO......................... Switches on or off echo output of Control Change messages (If this
function is on, Control Change messages received from an external
device will be retransmitted without modification.).
5 CONTROL CHANGE MODE field
Enables you to select the Control Change transmission/reception mode.
• NRPN ......................... If this button is on, the CL mix parameters will be transmitted/received
as NRPN messages on one MIDI channel (NRPN mode).
• TABLE button ........... If this button is on, the CL mix parameters will be transmitted/received
as Control Change messages on one MIDI channel (TABLE mode).
6 PARAMETER CHANGE field
Enables you to turn SysEx (system exclusive) messages on or off. (These special messages are used
to change the CL parameters.)
• Tx ................................ Switches Parameter Change transmission on or off.
• Rx ................................ Switches Parameter Change reception on or off.
• ECHO......................... Switches on or off echo output of Parameter Change messages (If this
function is on, Parameter Change messages received from an external
device will be retransmitted without modification.).
7 OTHER COMMAND field
Switches on or off echo output of other messages (If this function is on, other messages received
from an external device will be retransmitted without modification.).
1
2
4
6
7
3
5