User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
User settings (Security)
Reference Manual
172
Assignable encoders
You can assign the desired function to the GAIN/PAN/ASSIGN knob on the fader strip of each channel,
and control the function using the knob.
1. In the Function Access Area, press the SETUP button to access the SETUP screen.
2. Press the USER SETUP button to access the USER SETUP popup window.
3. Press the USER DEFINED KNOBS tab to select the USER DEFINED KNOBS page.
If you are logged-in as the Administrator, you can also turn on the FOR GUEST button in the
lower right of the screen to access the USER DEFINED KNOBS and ASSIGNABLE ENCODER
for Guest page, and make assignable knob settings for the Guest account.
4. Press the button in the ASSIGNABLE ENCODER field.
The ASSIGNABLE ENCODER SETUP popup window will appear.
5. Use the / buttons in the lower part of the field or the multifunction knobs on
the top panel to select the function you want to assign.
For details on the assignable functions and their parameters, refer to “Functions that can be
assigned to the assignable encoders” on page 263.
NOTE
SELECTED SEND is the default setting. It functions as the send to the MIX/MATRIX channel that
is selected for SENDS ON FADER in the Function Access Area.
6. Press the OK button to close the ASSIGNABLE ENCODER SETUP window.
7. Press the [GAIN/PAN/ASSIGN] key on the top panel repeatedly
to select ASSIGN.
The CL3 and CL1 feature one [GAIN/PAN/ASSIGN] key. Therefore, the
function of all GAIN/PAN/ASSIGN knobs will change simultaneously.
On the CL5, you can switch the knob function in block A (left side) and
block C/Master fader section (right side) independently by using the
corresponding [GAIN/PAN/ASSIGN] keys.
NOTE
This assignment does not apply to the multifunction knobs in the Centralogic section, since these
knobs are used to control on-screen parameters.
8. Operate the GAIN/PAN/ASSIGN knob on each fader strip.