User Manual

ManualsBrandsYamaha ManualsInterfacesI/O Rack

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- About the SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL section
- SELECTED CHANNEL VIEW screen
Centralogic section
- About the Centralogic section
- Operations in the Centralogic section
- OVERVIEW screen
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the output patch settings
- Changing the input patch settings
- Inserting an external device into a channel
- Directly outputting an INPUT channel
- Recording or playing back using DAW on a computer
Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
Output channels
- Signal flow for output channels
- Specifying the channel name, icon and channel color
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- About EQ and dynamics
- Using EQ
- Using dynamics
- Using the EQ or Dynamics libraries
Grouping and linking
- About DCA groups and Mute groups
- Using DCA groups
- Using mute groups
- Channel Link function
- Copying, moving, or initializing a channel
Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- About the Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
- Operating the Cue function
Talkback and Oscillator
- About the Talkback and Oscillator functions
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, effects, and Premium Rack
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About the internal effects
- Using the Premium Rack
- Using the graphic EQ, effect, and Premium Rack libraries
I/O device and external head amp
- Using an I/O device
- I/O device patching
- Remotely controlling an Rio unit
- Remotely controlling an amp
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using Program Changes to recall scenes and library items
- Using Control Changes to control parameters
- Using Parameter Changes to control parameters
User settings (Security)
- User Level settings
- Preferences
- USER DEFINED keys
- USER DEFINED knobs
- Assignable encoders
- Custom fader bank
- Master fader
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
Recorder
- About the USB memory recorder
- Assigning channels to the input and output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Using the CL console with Nuendo Live
Help function
- Loading a Help file from a USB flash drive
- Loading a text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index

Scene memory

Reference Manual

3. Use the tabs to select one of the following as the type of item you want to copy.

4. Select the copy-source channel or parameter.

The view will vary depending on the tab you select.

You cannot select different parameters from different channels.

To select a channel, press the corresponding [SEL] key on the top panel.

•INPUT tab

Select an input channel in the upper left area, and select its parameter in the lower left area.

You can select the following parameters.

• OUTPUT tab

Select an output channel in the upper left area, and select its parameter in the lower left area.

You can select the following parameters.

•RACK tab

Enables you to choose from GEQ RACK, EFFECT RACK, or PREMIUM RACK. You can

individually select an GEQ for a Flex15GEQ or an effect used in dual mode.

•PATCH/NAME tab

You can select the following parameters.

•DCA tab

You can select either ALL or LEVEL/ON. If ALL is selected, all parameters will be copied. If

LEVEL/ON is selected, the master level and DCA channel on/off status will be copied. You can

select copy-source items for each DCA group 1–16 individually.

5. In the DESTINATION SCENE area, select the range of paste-destination scenes.

Scenes specified between FROM and TO (inclusive) become the paste destination. Use

multifunction knob 7 to specify the FROM value, and multifunction knob 8 to specify the TO

value.

6. Press the PASTE button.

The selected items of the current scene will be pasted to the scene(s) in memory.

A progress bar will be displayed as the data is being pasted.

During the paste operation, the STOP button will appear. Press the STOP button if you want to

abort the operation. In that case, part of data will be pasted and you will be unable to undo the

operation.

INPUT Input channel and its parameters

OUTPUT Output channel and its parameters

RACK GEQ/effect/Premium rack

PATCH/NAME Input/output patch, channel name

DCA DCA group

ALL All input channel parameters

INPUT PATCH Input patch settings

NAME Channel name, icon, and channel color

Settings for the head amp assigned to the corresponding input channel,

and phase

DELAY Input delay settings

HPF HPF settings

DIGITAL GAIN Digital gain settings for the corresponding input channel

EQ EQ settings

DYNA 1 Dynamics 1 settings (including KEY IN SOURCE and KEY IN FILTER)

DYNA 2 Dynamics 2 settings (including KEY IN SOURCE)

MIX SEND Send level, pan, and PRE/POST of the signal sent to a MIX bus

MATRIX SEND Send level, pan, and PRE/POST of the signal sent to a MATRIX bus

FADER Fader level

CH ON On/off status of [ON] keys

INSERT Insert on/off status and insert point

INSERT PATCH Insert in/out patch settings, head amp settings for insert-in

DIRECT OUT Direct Out on/off, Direct Out level, Direct Out point and patch settings

MIX ON Send on/off to a MIX bus

MATRIX ON Send on/off to a MATRIX bus

TO ST TO ST on/off status, pan/balance settings

MONO TO MONO on/off status

ALL All output channel parameters

OUTPUT PATCH Output patch settings

NAME Channel name, icon, and channel color

EQ EQ settings

DYNA 1 Dynamics 1 settings (including KEY IN SOURCE)

INSERT Insert on/off status and insert point

INSERT PATCH Insert in/out patch settings, head amp settings for insert-in

FADER Fader level

CH ON On/off status of [ON] keys

TO ST/BAL TO ST on/off status, pan/balance settings

MONO TO MONO on/off status (MIX 1-24 only)

MATRIX SEND Send level, pan, and PRE/POST of the signal sent to a MATRIX bus

MATRIX ON Send on/off to a MATRIX bus

WITH SEND FROM

SOURCE CHs

SEND parameters of the send-source signal that will be sent to a

channel

INPUT PATCH All input channel patches, insert in/out patches, Direct Out patches

OUTPUT PATCH All output channel patches, insert in/out patches

INPUT NAME Channel names, icons, and colors for all input channels

OUTPUT NAME Channel names, icons, and colors for all output channels

Analog gain, phantom power on/off status, Gain Compensation, phase

settings

CH LINK Channel link settings