User Manual
Table Of Contents
- 1. Introduction
- 2. Conversion procedure
- 3. Reference
- 3.1. Conversion Options
- 3.2. Conversion between PM5D and M7CL
- 3.3. Conversion between PM5D and CL/QL
- 3.4. Conversion between M7CL and LS9
- 3.5. Conversion between M7CL and CL/QL
- 3.6. Conversion between LS9 and CL/QL
- 3.7. Conversion between RIVAGE PM and CL/QL
- 3.8. Conversion between RIVAGE PM and DM7
- 3.9. Conversion between CL/QL and DM7
- 3.10. “Recall Filter” Treatment
19
On the other hand, in the case of conversion from CL/QL to PM5D, only those in CL/QL Effect
Rack 1-8 that are being used as Effect units are converted to PM5D Effect 1-8. If a CL/QL Effect
Rack is being used as GEQ, this is not converted to the PM5D scene.
12) For details about the reproducibility of Library link Recall, Recall Safe, and Focus & Selective
Recall, refer to section "3.2.3 Library link – HA & Channel Name (in Input Patch/Output Patch
libraries)" or "3.10 “Recall Filter” Treatment".
13) In the case of conversion from PM5D to CL/QL, the Individual mode is always On. In the case of
conversion from CL/QL to PM5, Pan will not be converted.