User Manual

Screen areas
User's Guide
TF StageMix
- 10 -
SELECT MIXER screen
1 Network switching button
Switches the network connection between wireless and wired connection.
A Lightning to USB 3 Camera Adapter (or USB-C to USB Adapter) and an USB Ethernet Adapter are required to use a wired
connection.
You can switch between a wireless and wired connection when offline; you cannot switch while online.
2 Device list
The name of any consoles on the network that StageMix can connect to are displayed here.
Tap the name of the desired console to select it.
If multiple consoles are discovered, you can scroll this area up and down to view the names of other consoles.
When the maximum number of TF Editor and TF StageMix sessions (total: 3) are already connected to the TF series console,
a "restricted" mark is displayed to the left of the IP address. When you select a TF series console that has a "restricted" mark
displayed next to it and tap the CONNECT button, a message is displayed that indicates you cannot connect to the console.
3 CONNECT button
Connects StageMix to the console that is selected in the device list.
4 OFFLINE button
Switches StageMix to offline demo mode.
If a StageMix is connected to a console, it is disconnected.
մճ
ղ
ձ