User Manual

Screen areas
User's Guide
TF StageMix
- 34 -
SEND TO screen
Displayed by tapping the SEND TO button in the TOOLBAR area.
The screen specifies the level sent to the AUX bus from each channel.
1 ON buttons
Switches the flow sent to each AUX channel ON/OFF.
2 PRE buttons
Selects whether the signal sent to the AUX channel is sent before or after the fader.
On: Before the fader
Off: After the fader
3 Level sliders
Adjusts the level sent to each AUX channel.
4 SEND PAN sliders
Displayed when the sending destination is a stereo AUX bus. It is used to adjust the SEND PAN setting.
ձ
ճ
ղ
մ