User Manual

Screen areas

User's Guide

TF StageMix

GEQ screen

Displayed when you tap the GEQ button in the TOOLBAR area.

You can use the internal graphic equalizer (GEQ) to process AUX 1–8 and STEREO channel signals.

The GEQ is a mono, 12-band EQ. Each band is 1/3 octave wide, with an adjustable gain range of ±15dB.

31 bands are available; you can adjust gain for up to 12 bands.

1 GEQ button

Turns the GEQ on and off.

2 GEQ channel selection buttons

These buttons are displayed only when configuring the GEQ for stereo AUX buses or the STEREO channels.

They are not displayed for mono AUX buses.

: Turns the GEQ left/right channel link on and off.

L/R: Allows you select the left and right GEQ channels. For AUX channels, L and R correspond to the channel pair, such as

AUX 1 and 2.

3 EQ graph, RTA display, band selection

Displays the EQ settings with RTA (real-time analysis).

You can tap an area to move the display area and center in on where you tapped the screen.

While adjusting a gain slider, the point of the corresponding band is highlighted in pink.

4 Gain sliders

Allow you to adjust the gain for the corresponding band. The gain value is displayed above the handle.

Double-tap a handle to set the corresponding band's gain to 0dB.

Swipe left or right on an empty area to display the gain sliders for other bands.

5 Output level meter

Displays the GEQ output level.

6 Available bands display

Displays the number of additional bands that you can adjust.

7 Hold button

Turn this button on to display the peak value in the RTA display. You can change how the peak is displayed by using the Peak Hold

Mode setting in the PREFERENCE screen (page 16).

GEQ screen menu

The following items are available in the GEQ screen's context menu.

Copy: Copies the GEQ parameters of the selected channel to the clipboard.

Paste: Pastes the GEQ parameters in the clipboard to the selected channel.

Compare: Allows you to compare the GEQ parameters of the selected channel with the GEQ parameters in the clipboard by

switching between the two.

Default: Resets GEQ settings to their default values.

մձղ ճ