User Manual

Chapter 6 Tree View window
Amp Editor Owner’s Manual
106
2. From the [Device List], select the device that you want to add, and click the [Add] button.
The selected device will be added to the [Device] area at the right.
• You can also add a device by double-clicking a device shown in [Device List].
• By clicking the [Add Range...] button you can add multiple devices of the same model.
• If you want to change the ID of the device you added, click the ID column to select an ID.
3. Click the [OK] button.
A new device will be added below the specified workspace.
 Copying settings
You can copy the settings of an amplifier that is listed in the tree. You can select from two copy types: [All cur-
rent parameters], which enables you to copy all settings other than those unique to the device, such as a Device
ID; and [Selected parameters], which enables you to copy the selected settings.
 Copying “All current parameters”
1. Right-click the icon of the amplifier whose settings you want to copy.
2. From the context menu, choose [Copy]  [All current parameters].
All parameters other than those listed below will be copied.
Scene, Device ID, device name, Utility settings, Log Setup, Global Link, Solo and MY-Card (TXn only)
NOTE