User Manual

Chapter 7 Detail View window
Amp Editor Owner’s Manual
121
e [SOLO] button (for devices other than XMV)
This turns Solo on/off for each channel.
This is available if the main panel window’s Solo function (Solo Master) is on.
If you turn this on when the solo mode is “Last,” only the signal of the last-specified channel in the area will
be soloed. If you turn this on when the solo mode is “Mix,” the signals of the specified multiple channels in
the area will be soloed.
r [MUTE] button
Mutes the output signal of each channel.
t [Polarity] button (Tn/PC-N/XMV only)
Inverts the phase of the output signal of each channel.
This button is available only for the Tn/PC-N. For the TXn, this is specified in the Signal Path View window.
Mute on :
Mute off :
Phase reversal on :
Phase reversal off :