User Manual

Chapter 5 Main panel window
Amp Editor Owner’s Manual
73
When is selected
When the input voltage to GPI IN changes from below the center voltage to above it, the [Min]
value and [Max] value will be alternately specified.
Example: How the input voltage is related to the Attenuation when “Attenuation” is specified as the
parameter
When is selected
When the input voltage to GPI IN changes from above the center voltage to below it, the [Min]
value and [Max] value will be alternately specified.
Example: How the input voltage is related to the Attenuation when “Attenuation” is specified as the
parameter
[Direct Parameter Value]
The parameter of the component will be changed to a specific value. Use [Device] to select the ampli-
fier that will be controlled.
Use [Parameter] to specify the name of the parameter that will be edited. Use [Max] to specify the
edited value of the parameter. [Min] and [Trigger Type] are unavailable.
When the input voltage to GPI IN changes from below the center voltage to above it, the parameter
value will be set to the [Max] setting.
[Emergency Scene Recall]
Of the amplifiers connected to the device, the scene will be recalled to only the amplifier that specified
by the scene number in the EMG Scene Setup of the Utility dialog box.
[Device], [Parameter], [Min] and [Max] are unavailable. Use [Trigger Type] to specify how the input
voltage from GPI IN will be applied to the parameter.
GPI IN input voltage
max
GPI IN input voltage
min
[Max] value
Center
voltage
[Min] value [Max] value
GPI IN input voltage
max
GPI IN input voltage
min
[Min] value
Center
voltage
[Max] value [Min] value