User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
58
“Alert” dialog box
If an alert specified as “Warning,” “Error,” or “Fault” occurs, the “Alert” dialog box will appear, indicating the
content of the alert. The single most recent alert is displayed; when a new alert occurs, it will replace the old alert.
To check the details of the alert that occurred, open the “Event Log” dialog box (page 43).
Icon
The icon indicates the type of alert that occurred.
Device
Indicates the name (label) of the device for which the alert occurred.
Message
Indicates the content of the alert.
For details of massages, refer to “Alert message list” (page 207).
Status
Indicates the status of the alert.
This will indicate Occurred when the alert occurs. When a continuing alert has ended, this will indicate
Resolved.
[Locate This Device] button
When you click this button, the corresponding device will be selected in the Tree View window.
: Warning
:Error
:Fault