User Manual

TX6n/5n/4n Owner’s Manual

Wiring of the [SPEAKERS] Connectors

Turn off the POWER switch before connecting external devices to the TXn.

Remove about 13mm of insulation from the end of each

speaker cable, and pass the bare wire through the holes in

the appropriate speaker terminals. Tighten the terminals to

securely clamp the wires. Be sure that the bare wire ends do

not jut out from the terminals and touch the chassis.

From above, insert the Y-plugs all the way into the opening,

and tighten the terminals.

Insert the Speakon cable plug (Neutrik NL4) into the con-

nector, and turn it to the right to lock it.

CHANNEL A

Stereo/Parallel Mode

Bridge Mode

CHANNEL B

5-way Binding Post Connectors

No Plugs

Y-plugs

13mm

0.25"

(6.3mm)

≤0.51"

(12.9mm)

Speakon Connectors

Neutrik Ampliﬁer

1+ A+

1– A–

2+ B+

2– B–

Neutrik Ampliﬁer

1+ +

1–

2+ –

2–

Neutrik Ampliﬁer

1+ B+

1– B–

1–

2–

Neutric NL4 plugs