User Manual

Reattach the grille and emblem by reversing the steps
of “Removing the grille”.
• Reattach the emblem in the correct position.
1 Paint the bracket using spray-type paint.
• Cover the shaft of the bracket base with masking materials to avoid
paint contact.
2 Allow the applied paint to completely dry.
1 Remove the emblem on the front of the grille.
• The emblem is attached by adhesive tape.
2 Paint the grille using spray-type paint.
• We recommend removing the non-woven material behind the grille.
3 Allow the paint to completely dry.
4 Reattach the emblem to the grille.
• If the non-woven material was removed, replace it in the original
position.
• Use the center hole of the non-woven material as a guide, and reattach
the emblem to the grille.
■ Work in an area that has adequate ventilation.
■ Painting procedures often require the use of volatile solvents. Follow all necessary safety precautions to avoid any risk of a fire.
■ Work carefully to avoid injury when removing/attaching the grille.
■ Yamaha cannot be held responsible for any damage to the speaker(s) as a result of painting them.
Reattaching the grille
NOTE
Do not apply force at the center area of the grille, as it may be
distorted.
Painting the bracket
VXC4 / VXC4W / VXC6 / VXC6W / VXC8 / VXC8W
Painting the grille
CAUTION
1
Shaft of bracket base
1
2
4