User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Control
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Screen structure
- Basic process
- Start up, and register devices
- Placing widgets on a page
- Labeling widgets for easier recognition
- Adding a page
- Specifying a background for the page
- Adjusting the placement of the widgets
- Saving the project file
- Testing operation
- Making security settings
- Creating a controller file
- Making KIOSK start automatically
- Adding parameters or meters for an MTX/MRX system
- Functions specific to initial mode
- Title bar
- Menu bar
- Tool bar
- “Controllers” area
- “Devices” area
- “Widgets” area
- Work area
- “Properties” area
- Widgets
- Dialog boxes and windows
- “Setup” dialog box
- “New Project Wizard” dialog box
- “Add Controller” dialog box
- “Run Controller File” dialog box
- “Import Controller File” dialog box
- “Select Controllers to Import” dialog box
- “Export Controller File” dialog box
- “Imported Images” dialog box
- “Add Device” dialog box
- “Target Editor” dialog box
- “Edit Text” dialog box
- “Edit Device Identifier” dialog box
- “Select Image” dialog box
- “Master Style” dialog box
- “System Monitor” window
- “ProVisionaire Monitoring Service Settings” view
- Specifying the IP address
- Tips
- Troubleshooting
12
Basic process
Using the creation of a simple page as an example, this section
explains the process from startup to controlling a device. In this
example, we control the level and on/off for input channel 1 of a
CL5 (console ID=1).
In the case of an MRX, this procedure cannot be used to place a wid-
get; refer to “Adding parameters or meters for an MTX/MRX sys-
tem.”
Here’s how to start ProVisionaire Control, create a controller and
page, and register a device to control.
1. Start ProVisionaire Control.
To start, choose [Start] button[All Programs] or [All Apps][Yamaha
ProVisionaire Control][ProVisionaire Control Vx.x] (x.x is the version
number).
2. If you want to create a new project, click [New Project]
button .
If you want to load an existing file, choose the [File]
menu command [Open Project File], and select the file
that you want to load.
In this example, we explain the procedure when you click [New Proj-
ect] button.
3. When the “Setup” dialog box appears, click [OK] or
[Cancel].
ProVisionaire Control transitions to design mode, and the “New Proj-
ect Wizard” dialog box opens.
NOTE
Select the network adapter and click [OK], you can verify the
devices by connecting the computer in which ProVisionaire Control
is installed to the network. In the “Devices” area, right-click the
applicable device and choose [Add] to register it.
Start up, and register devices