User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
34
[Show/Hide Tree] button
Shows or hides the Tree View window (page 102).
[Custom Control Panel] button
Clicking this will display a popup menu from which you can select a custom control panel. By selecting [New
Custom Control Panel] you can create a new custom control panel (page 180). By selecting [System View
Creator...], you can create a new custom control panel using the “System View Creator” dialog box, which
provides templates for frequently-used parameters (page 98).
• The “System View” you created using the “System View Creator” dialog box can also be accessed
from the [Custom Control Panel] button.
[Show/Hide Event Log] button
Shows or hides the “Event Log” dialog box (page 43).
[Show/Hide Device Information] button
Shows or hides the “Device Information” dialog box (page 49).
[Show/Hide Scene Manager] button
Shows or hides the “Scene Manager”dialog box (page 51).
ONLINE/OFFLINE (communication status)
This indicates the status of communication between the computer and the devices in the workspace.
“Online” is the state in which the devices are connected to the computer and network, and are synchronized
with Amp Editor so that they can be monitored and controlled. “Offline” is the state in which the devices and
computer are not physically connected, or connected but not synchronized.
When you click this button, the “Synchronization” dialog box will appear. By synchronizing Amp Editor with
your devices, you will then be able to monitor and control the amplifiers in realtime (page 94).
: Online status in which at least one device in the workspace can be monitored and
controlled
: Status in which all devices in the workspace are offline
NOTE