User Manual
51
EAD10 Owner’s Manual
Enhance Your Drum Set with Separately Sold Add-Ons
Application Guide
3.
Connect the DT50S to the [eSNARE/r] jack
on the Main Unit rear panel.
4.
Press the [MENU] button to make necessary
settings for using DT50S.
When the DT50S is connected to the [eSNARE/r] jack,
settings can be used as they are, without having to make
any changes. When any other drum trigger is connected,
perform the following settings.
• Specify the type of trigger that is connected
Select the appropriate pad from the pad type list. For
more information, refer to the Reference Manual
(Advanced) (PDF). (MENU/Trigger/Pad Type)
• Specify the function of the connected trigger
Play trigger sounds (page 35)
This completes set up.
Main Unit
DT50S