User Manual

Marching Drum Carrier Owner's Manual
8
Make sure to install the attachment to the instrument before mounting the instrument on the carrier.
NOTE When installing the attachment to a
snare drum with a slide-attachment,
follow the instructions of “Previous
settings for snare drum with slide-
attachment” on page 9.
1 Hold the tube lugs with the lug holders of
the attachment as shown in the illustration.
Use a tuning key to tighten the both bolts.
2 To prevent the snare drum from slipping
down while playing it, make sure that the
upper part of the attachment is always
touching the suspension ring.
3 Use a tuning key to tighten both bolts and
fix the attachment.
NOTE You can also set the drum tilted.
4 Tighten both snare hold bolts by hand to
secure the attachment and prevent it from
moving.
5 Use the supplied wrench (10mm) to tighten
both lock nuts and fix the attachment.
1. Installing the attachment to the instrument
Attachment
Snare drum lug
(tube lug type)
Hold with the
lug holder.
Partially tighten
the bolts with a
tuning key.
Touching to the
suspension ring.
Tighten the bolts to fix
the attachment.
When setting the
drum tilted.
Snare hold
bolts
Lock nut
Setting the Snare Drum