Service manual

ENG
ENGINE DISASSEMBLY
4-9
AUTOLUBE OIL PUMP
1. Remove:
autolube oil pump
2. Remove:
• circlip
pump drive gear
• pin
• circlip
3. Remove:
carburetor joint
reed valve
reed valve gasket
REMOVING THE CENTERSTAND
1. Remove:
• clip
rubber washer
• axle
• spring
central stand
DISASSEMBLING THE CRANKCASE AND
CRANKSHAFT
1. Remove:
oil seal stopper
screws (crankcase)
NOTE:
Loosen each screw 1/4 of a turn and remove
them after loosening them.