Service manual

ENG
ENGINE ASSEMBLY AND ADJUSTMENT
4-36
8. Adjust:
• v-belt
Tense the V-belt by turning the primary she-
ave several times.
9. Install:
• fan (CS50 only)
Side right
INSTALLING THE KICKSTARTER
1. Install:
• return spring 
• kick shaft 
• collar 
• flat washer 
• circlip 
2. Hook on:
• return spring
(on kick gear and hub)
3. Install:
• kick pinion gear 
4. Install:
• crankcase cover 
5. Install:
• kick crank 
Screw (fan)
7 Nm (0.7 m • kg)
Screw (crankcase cover)
9 Nm (0.9 m • kg)
Bolt (kick crank)
10 Nm (1.0 m • kg)