Service manual

3 - 45
CHK
ADJ
ADJUSTING THE REAR SHOCK ABSORBER ASSEMBLY/
CHECKING THE TIRES
ACHTUNG:
CAUTION:
Never turn the adjusting ring beyond the
maximum or minimum setting.
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
Adjusting length a
Minimum 42.5 mm (1.67 in)
Standard 42.5 mm (1.67 in)
Maximum 51.5 mm (2.03 in)
EAS00166
CHECKING THE TIRES
The following procedure applies to both of
the tires.
1. Measure:
• tire pressure
Out of specification → Regulate.
WARNING
WARNING
• The tire pressure should only be checked
and regulated when the tire temperature
equals the ambient air temperature.
• The tire pressure and the suspension
must be adjusted according to the total
weight (including cargo, rider, passenger
and accessories) and the anticipated
riding speed.
• Operation of an overloaded motorcycle
could cause tire damage, an accident, or
an injury.
NEVER OVERLOAD THE MOTORCYCLE.
3