Service manual

3 - 56
CHK
ADJ
CHECKING AND CHARGING THE BATTERY/
CHECKING THE FUSES
6. Install:
• battery
• battery band
7. Connect:
• battery leads
(to the battery terminals)
ACHTUNG:
CAUTION:
First, connect the positive battery lead 1,
then the negative battery lead 2.
8. Check:
• battery terminals
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
9. Lubricate:
• battery terminals
10.Install:
• rider seat
Refer to “SEATS AND SIDE COVERS”.
Recommended lubricant
Dielectric grease
EAS00181
CHECKING THE FUSES
The following procedure applies to all of
the fuses.
ACHTUNG:
CAUTION:
To avoid a short circuit, always set the
main switch to “OFF” when checking or
replacing a fuse.
1. Remove:
• left side cover
Refer to “SEATS AND SIDE COVERS”.
2. Check:
• continuity
▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼
a. Connect the pocket tester to the fuse and
check the continuity.
3