Service manual

3 - 62
CHK
ADJ
INSTRUMENT FUNCTIONS
To reset the trip meter to “0”, push the set
button until it displays “TRIP A” or “TRIP
B”, then push mode button and hold it
down for at least one second.
NOTE:
This motorcycle does not have a tachome-
ter. However, it is equipped with an engine
revolution limiter, which prevents the
engine revolution from exceeding approxi-
mately 4,400 r/min.
Setting the clock
This clock always shows the time regard-
less of the main switch position.
1. Turn the main switch to “ON”.
2. Press both left and right buttons simulta-
neously until both hours and minutes
flash. 1
3. Push the left button and the hour display
will flash. 2
4. Push the right button to change the
hours. 3
5. Push the left button and the minute dis-
play will flash. 4
6. Push the right button to change the min-
utes. 5
7. Push the left button and both hours and
minutes will flash. 6
8. Push the right button for two seconds to
set the clock. 7
3