Service manual

4 - 18
CHAS
REAR WHEEL, BRAKE DISC AND REAR WHEEL PULLEY
NOTE:
Tighten the self-locking nuts in stages and
in a crisscross pattern.
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
T
R
.
.
Rear wheel pulley self-locking nut
95 Nm (9.5 m • kg, 68 ft • lb)
ASSEMBLING THE REAR WHEEL
1. Install:
• bearings
• spacer
• bearing
• oil seal
Refer to “FRONT WHEEL AND BRAKE
DISCS”.
New
EAS00572
INSTALLING THE REAR WHEEL
1. Lubricate:
• oil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
• rear wheel drive hub dampers 1
3. Install:
• rear wheel drive hub assembly 1
4