Service manual
4 - 19
CHAS
REAR WHEEL, BRAKE DISC AND REAR WHEEL PULLEY
4. Install:
• rear wheel pulley 1
NOTE:
Tighten the self-locking nuts in stages and
in a crisscross pattern.
T
R
.
.
95 Nm (9.5 m · kg, 68 ft · lb)
5. Install:
• brake disc
NOTE:
• Apply locking agent (LOCTITE
648) to the
threads of the brake disc bolts.
• Tighten the brake disc bolts in stages and
in a crisscross pattern.
6. Install:
• brake caliper bracket 1
• washer
• brake caliper bracket bolt 2
NOTE:
Temporarily tighten the brake caliper
bracket bolt.
7. Install:
• collars
• rear wheel
• adjusting plates
• rear wheel axle
• washer
• wheel axle nut
NOTE:
Temporarily tighten the wheel axle nut.
8. Adjust:
• drive belt slack
Refer to “ADJUSTING THE DRIVE BELT
SLACK” in chapter 3.
4