Service manual

4 - 28
CHAS
FRONT AND REAR BRAKES
b. Loosen the bleed screw and push the
brake caliper pistons into the brake cali-
per with your finger.
c. Tighten the bleed screw.
d. Install new brake pads and a new brake
pad spring.
NOTE:
The arrow a on the brake pad spring must
point in the direction of disc rotation.
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲
T
R
.
.
Bleed screw
6 Nm (0.6 m • kg, 4.3 ft • lb)
6. Install:
• brake pad pins
• brake pad clips
• brake pad cover
• brake caliper
T
R
.
.
40 Nm (4.0 m · kg, 29 ft · lb)
7. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the
proper level.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
8. Check:
• brake pedal operation
Soft or spongy feeling → Bleed the brake
system.
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” in chapter 3.
4