Service manual

4 - 53
CHAS
FRONT AND REAR BRAKES
1. Install:
• bleed screw
• brake caliper piston seals 1
• brake caliper pistons 2
New
2. Install:
• brake pads
• brake pad spring 1
• brake pad pins 2
• brake pad clips 3
NOTE:
The arrow a on the brake pad spring must
point in the direction of disc rotation.
3. Install:
• brake pad cover
4. Install:
• brake caliper 1
• brake caliper bolts 2
T
R
.
.
40 Nm (4.0 m · kg, 29 ft · lb)
5. Install:
• copper washers
• brake hose
• union bolt
WARNING
WARNING
Proper brake hose routing is essential to
insure safe motorcycle operation. Refer to
“CABLE ROUTING”.
ACHTUNG:
CAUTION:
When installing the brake hose onto the
brake caliper, make sure the brake pipe
touches the projection a on the brake cali-
per.
New
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
4