Service manual
4 - 63
CHAS
FRONT FORK
6. Install:
• outer tube bushing 1
• seal spacer 2
(with the fork seal driver weight 3 and
adapter 4)
Fork seal driver weight
YM-33963
Adapter
YM-8020
New
7. Install:
• oil seal 1
(with the fork seal driver weight 2 and
adapter 3)
ACHTUNG:
CAUTION:
Make sure the numbered side of the oil seal
faces up.
NOTE:
• Before installing the oil seal, lubricate its
lips with lithium soap base grease.
• Lubricate the outer surface of the inner
tube with fork oil.
• Before installing the oil seal, cover the top
of the front fork leg with a plastic bag 4 to
protect the oil seal during installation.
New
8. Install:
• oil seal clip 1
NOTE:
Adjust the oil seal clip so that it fits into the
outer tube’s groove.
9. Install:
• dust seal 1
(with the fork seal driver weight 2)
New
4