Service manual

5 - 25

ENG

ROCKER ARMS, PUSH RODS AND VALVE LIFTERS

2. Install:

• dowel pins 1

• rocker arm gasket 2

New

3. Install:

• rocker arm base

(with rocker arms)

• push rods

▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼

a. Put the rocker arm base on the cylinder

head.

b. Install the push rods.

NOTE:

• Be sure to correctly install the push rods

between the rocker arms and valve lifters

as shown. The illustration is viewed from

the right side of the motorcycle.

Å Rear cylinder

ı Front cylinder

1 Intake side rocker arm

2 Exhaust side rocker arm

3 Intake valve lifter

4 Exhaust valve lifter

• Lubricate the push rod end balls with

engine oil.

c. Install the rocker arm base bolts.

NOTE:

Tighten the rocker arm base bolts in stages

and in a crisscross pattern.

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Rocker arm base bolt

10 Nm (1.0 m • kg, 7.2 ft • lb)