Service manual

5 - 26
ENG
ROCKER ARMS, PUSH RODS AND VALVE LIFTERS
INSTALLING THE CYLINDER HEAD
COVERS
The following procedure applies to both
cylinders.
1. Install:
• dowel pins 1
• cylinder head cover spacer gasket 2
New
2. Install:
• cylinder head cover spacer 1
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
3. Install:
• dowel pins 1
• cylinder head cover gasket 2
New
4. Install:
• cylinder head cover 1
Bolts 2: R = 25 mm (0.98 in)
Bolts 3: R = 35 mm (1.38 in)
Bolts 4: R = 50 mm (1.97 in)
Bolts 5: R = 65 mm (2.56 in)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
5. Connect:
• oil tank breather hose 1
• cylinder head breather hose 2
5