Service manual
5 - 31
ENG
CAMSHAFTS
REMOVING THE CAMSHAFTS
1. Loosen:
• front cylinder camshaft end cover bolts
1
• camshaft drive gear bolt 2
NOTE:
• Place a folded copper washer
3 between
the teeth of the camshaft drive gear and
camshaft driven gear in order to lock
them.
• Do not damage the teeth of the camshaft
drive and camshaft driven gears.
2. Loosen:
• camshaft driven gear nut
1
NOTE:
• Place a folded copper washer
2 between
the teeth of the camshaft drive gear and
camshaft driven gear in order to lock
them.
• Do not damage the teeth of the camshaft
drive and camshaft driven gears.
3. Remove:
• front cylinder camshaft end cover
• camshaft drive gear 1
• camshaft driven gear 2
• straight keys
NOTE:
Cover the crankcase hole with a clean rag
3
to prevent the straight keys from falling into
the crankcase.
4. Remove:
• oil delivery pipe 1
• camshaft cover 2
(along with the camshafts)
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all
of the bolts are fully loosened, remove
them.
5