Service manual
5 - 37
ENG
CAMSHAFTS
8. Tighten:
• camshaft drive gear bolt 1
• front cylinder camshaft end cover bolts
2
NOTE:
• Place a folded copper washer 3 between
the teeth of the camshaft drive gear and
camshaft driven gear in order to lock
them.
• Do not damage the teeth of the camshaft
drive and camshaft driven gear.
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
9. Install:
• short decompression push rod 1
• long decompression push rod 2
10.Install:
• decompression solenoid 1
11.Install:
• valve lifters
• push rods
• rocker arms
• cylinder head covers
Refer to “ROCKER ARMS, PUSH RODS
AND VALVE LIFTERS”.
• exhaust pipes
• muffler
Refer to “ENGINE”.
5