Service manual

5 - 75
ENG
SHIFT SHAFT
EAS00328
CHECKING THE SHIFT SHAFT
1. Check:
• shift shaft 1
Bends/damage/wear → Replace.
• shift lever spring 2
Damage/wear → Replace.
EAS00330
CHECKING THE STOPPER LEVER
1. Check:
• stopper lever 1
Bends/damage → Replace.
Roller turns roughly → Replace the stop-
per lever.
EAS00331
INSTALLING THE STOPPER LEVER AND
SHIFT SHAFT
1. Install:
• stopper lever 1
• stopper lever spring 2
NOTE:
• Apply locking agent (LOCTITE

) to the
threads of stopper lever bolt.
• Install the ends of the stopper lever spring
onto the stopper lever and the crankcase
boss 3.
• Mesh the stopper lever with the shift
drum segment assembly.
2. Install:
• lock washer 1
• shift shaft spring stopper 2
NOTE:
Apply locking agent (LOCTITE

) to the
threads of shift shaft spring stopper.
3. Bend the lock washer tab along a flat
side of the shift shaft spring stopper.
New
T
R
.
.
22 Nm (2.2 m · kg, 16 ft · lb)
5