Service manual

5 - 105
ENG
CRANKCASE
CHECKING THE OIL DELIVERY PIPE
1. Check:
• oil delivery pipe 1
Damage → Replace.
Obstruction → Wash and blow out with
compressed air.
• O-rings 2
Damage/wear → Replace.
CHECKING THE ENGINE OIL PUMP DRIVE
1. Check:
• oil pump drive gear 1
• oil pump driven gear 2
Chips/pitting/roughness/wear → Replace
the defective part(s).
EAS00416
ASSEMBLING THE CRANKCASE
1. Apply:
• sealant
(onto the crankcase mating surfaces)
NOTE:
Do not allow any sealant to come into con-
tact with the oil gallery.
2. Install:
• dowel pins 1
• joint pipe 2
Quick Gasket

ACC-11001-05-01
3. Install:
• left crankcase
(onto the right crankcase)
NOTE:
• Turn the shift drum segment 1 to the
position shown in the illustration. In this
position, the shift drum segment’s teeth
will not contact the crankcase during
crankcase installation.
• Tap lightly on the left crankcase with a
soft-face hammer.
5