Service manual
5 - 107
ENG
CRANKCASE
8. Install:
• washer
• generator shaft bolt 1
NOTE:
• Apply locking agent (LOCTITE
) to the
threads of the generator shaft bolt.
• While holding the generator rotor 2 with
the sheave holder 3, tighten the genera-
tor shaft bolt.
Sheave holder
YS-01880
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
9. Install:
• generator shaft end cover 1
10.Install:
• shift shaft
• clutch
Refer to “SHIFT SHAFT” and “CLUTCH”.
• pistons
• cylinders
Refer to “CYLINDERS AND PISTONS”.
• camshaft
Refer to “CAMSHAFTS”.
• cylinder head
Refer to “ROCKER ARMS, PUSH RODS
AND VALVE LIFTERS”.
11.Install:
• engine
Refer to “ENGINE”.
5